Please use this identifier to cite or link to this item: http://idr.nitk.ac.in/jspui/handle/123456789/10155
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPrabhu, K.N.-
dc.contributor.authorChowdary, B.-
dc.contributor.authorVenkataraman, N.-
dc.date.accessioned2020-03-31T08:18:39Z-
dc.date.available2020-03-31T08:18:39Z-
dc.date.issued2005-
dc.identifier.citationJournal of Materials Engineering and Performance, 2005, Vol.14, 5, pp.604-609en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/10155-
dc.description.abstractHeat flow at the casting/mold interface was assessed and studied during solidification of Al-Cu-Si (LM 21) alloy in preheated cast iron molds of two different thicknesses, coated with graphite and alumina based dressings. The casting and the mold were instrumented with thermocouples connected to a computer controlled temperature data acquisition system. The thermal history at nodal locations in the mold and casting obtained during experimentation was used to estimate the heat flux by solving the one-dimensional inverse heat conduction problem. The cooling rate and solidification time were measured using the computer-aided cooling curve analysis data. The estimated heat flux transients showed a peak due to the formation of a stable solid shell, which has a higher thermal conductivity compared with the liquid metal in contact with the mold wall prior to the occurrence of the peak. The high values of heat flux transients obtained with thin molds were attributed to mold distortion due to thermal stresses. For thin molds, assumption of Newtonian heating yielded reliable interfacial heat transfer coefficients as compared with one-dimensional inverse modeling. The time of occurrence of peak heat flux increased with a decrease in the mold wall thickness and increase in the casting thickness. ASM International.en_US
dc.titleCasting/mold thermal contact heat transfer during solidification of Al-Cu-Si alloy (LM 21) plates in thick and thin moldsen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
File Description SizeFormat 
10155.pdf194.11 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.