Please use this identifier to cite or link to this item: http://idr.nitk.ac.in/jspui/handle/123456789/10186
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAugustin, A.
dc.contributor.authorRajendra, Udupa, K.
dc.contributor.authorUdaya, Bhat, K.
dc.date.accessioned2020-03-31T08:18:42Z-
dc.date.available2020-03-31T08:18:42Z-
dc.date.issued2019
dc.identifier.citationTransactions of the Indian Institute of Metals, 2019, Vol.72, 6, pp.1683-1685en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/10186-
dc.description.abstractHospital care-assisted infections introduce problems like prolonged hospital stay, additional financial burden and higher death rate. Since copper is registered by US Environmental Protection Agency as the only solid antimicrobial metal, it could be used in hospital touch surfaces. In the present work, copper has been deposited on the aluminium substrate by DC magnetron sputtering method with different target power. Prior to the coating, the substrate has undergone double zincation process. The coating has been characterized by XRD, SEM, TEM, scratch hardness test and microhardness test. From the TEM micrographs, the grain size has been found to decrease from 49 to 18 nm on increasing the deposition power from 50 to 150 W. Along with the decrease in the grain size, the mechanical properties like scratch hardness and microhardness of the coating have been increased. The preferred growth along [111] direction observed in XRD analysis is responsible for the increase in the hardness of the coating apart from the presence of the nano-grains. The SEM image of the coating shows nodular morphology which enhances the surface area. 2019, The Indian Institute of Metals - IIM.en_US
dc.titleCharacterization of DC Magnetron Sputtered Copper Thin Film on Aluminium Touch Surfaceen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.