Please use this identifier to cite or link to this item: http://idr.nitk.ac.in/jspui/handle/123456789/11665
Title: Influence of microwave hybrid heating on the sliding wear behaviour of HVOF sprayed CoMoCrSi coating
Authors: Prasad, C.D.
Joladarashi, S.
Ramesh, M.R.
Srinath, M.S.
Channabasappa, B.H.
Issue Date: 2018
Citation: Materials Research Express, 2018, Vol.5, 8, pp.-
Abstract: CoMoCrSi superalloy powder (Tribaloy-T400) consists of intermetallic laves phase and primary eutectic phase of Co-rich solid solution. Processing of Tribaloy-T400 powder is carried out through high-energy ball milling (HEBM) technique to obtain a higher volume fraction of intermetallic laves phases. The feedstock is sprayed using high-velocity-oxy-fuel (HVOF) process on titanium grade-15 substrate. The coating microstructure is homogenized by microwave hybrid heating technique. Characterization of feedstock, as-sprayed and microwave fused coatings is done by using Scanning Electron Microscopy (SEM), Energy dispersive spectroscopy (EDS) and x-ray Diffraction (XRD). Porosity, surface roughness, microhardness, and bond strength are measured. Adhesive wear behavior of the coatings under the dry sliding condition is evaluated at an applied load of l0 and 20 N and temperature of 200, 400 and 600 C Fused coating exhibit higher wear resistance than the as-sprayed coatings and substrate. The hard intermetallic laves phases which are amorphous (bulk metallic glass) in nature strengthen the coating at high temperatures. 2018 IOP Publishing Ltd.
URI: http://idr.nitk.ac.in/jspui/handle/123456789/11665
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.