Please use this identifier to cite or link to this item:
http://idr.nitk.ac.in/jspui/handle/123456789/11670
Title: | Influence of Multidirectional Forging on Microstructural, Mechanical, and Corrosion Behavior of Mg-Zn Alloy |
Authors: | Ramesh, S. Anne, G. Nayaka, H.S. Sahu, S. Ramesh, M.R. |
Issue Date: | 2019 |
Citation: | Journal of Materials Engineering and Performance, 2019, Vol.28, 4, pp.2053-2062 |
Abstract: | Multidirectional forging (MDF) was applied to Mg-6%Zn alloy up to 5 passes successfully at 280 C. MDF-processed materials were characterized using optical microscope, scanning electron microscope, electron backscatter diffraction, transmission electron microscope, and x-ray diffraction. Obtained results showed a significant reduction in grain size (up to 3.8 ?m) having a large fraction of high-angle grain boundaries after 5 passes of MDF process. Maximum tensile strength of 230 MPa was achieved for 5-pass MDF-processed Mg-6%Zn alloy which is about ~ 2.0 times higher in comparison with that of homogenized alloy (117 MPa) and was attributed to higher dislocations density and grain refinement. Corrosion behavior of the alloy was investigated in 0.1 M NaCl solution using potentiodynamic polarization test, electrochemical impedance spectra analysis, and immersion tests. It was found that the corrosion rate of 5-pass MDF sample improved (0.34 mm/year) ~2.5 times in comparison with that of homogenized Mg-6%Zn alloy (0.86 mm/year) due to fine grain structure, which creates more grain boundaries that act as a corrosion barrier. 2019, ASM International. |
URI: | http://idr.nitk.ac.in/jspui/handle/123456789/11670 |
Appears in Collections: | 1. Journal Articles |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.