Please use this identifier to cite or link to this item: http://idr.nitk.ac.in/jspui/handle/123456789/11973
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSomasundaram, B.
dc.contributor.authorKadoli, R.
dc.contributor.authorRamesh, M.R.
dc.date.accessioned2020-03-31T08:36:01Z-
dc.date.available2020-03-31T08:36:01Z-
dc.date.issued2015
dc.identifier.citationTransactions of the Indian Institute of Metals, 2015, Vol.68, 2, pp.257-268en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/11973-
dc.description.abstractThe hot corrosion behavior of high velocity oxyfuel sprayed (Cr3C2 35 % NiCr) + 5 % Si coatings on three substrate alloys of SA213-T22, MDN-310 and Superfer 800 H was investigated. The as-sprayed coatings are characterized with respect to microstructure and mechanical properties. Thermocyclic hot corrosion studies were performed in a molten salt environment of Na2SO4 60 % V2O5 for 50 cycles at 700 C. Thermogravimetric technique was used to establish the kinetics of hot corrosion of uncoated and coated steels. It was observed that the coated steel showed better hot corrosion resistance than the uncoated steels. The coated steels follow the parabolic rate law of oxidation and the parabolic rate constant values are appreciably lower in comparison to the uncoated steels. The coated steels showed slow oxidation kinetics which indicated that the reaction rate is diffusion limited. The oxides of Cr2O3 and SiO2 formed on the outermost surface of the coatings are found to be passive in the molten NaVO3 melt. 2014, The Indian Institute of Metals - IIM.en_US
dc.titleHot Corrosion Behaviour of HVOF Sprayed (Cr3C2 35 % NiCr) + 5 % Si Coatings in the Presence of Na2SO4 60 % V2O5 at 700 Cen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.