Please use this identifier to cite or link to this item: http://idr.nitk.ac.in/jspui/handle/123456789/13113
Full metadata record
DC FieldValueLanguage
dc.contributor.authorShenoy, C.S.-
dc.contributor.authorPatil, S.S.-
dc.contributor.authorGovardhan, P.-
dc.contributor.authorShourya, A.-
dc.contributor.authorDasari, Hari Prasad-
dc.contributor.authorSaidutta, M.B.-
dc.contributor.authorDasari, H.en_US
dc.date.accessioned2020-03-31T08:45:15Z-
dc.date.available2020-03-31T08:45:15Z-
dc.date.issued2019-
dc.identifier.citationEmission Control Science and Technology, 2019, Vol.5, 4, pp.342-352en_US
dc.identifier.urihttps://idr.nitk.ac.in/jspui/handle/123456789/13113-
dc.description.abstractSolid oxide cell (SOC) perovskite electrode materials (BSCF (Ba0.5Sr0.5Co0.8Fe0.2O3-?), LSCF (La0.6Sr0.4Co0.2Fe0.8O3-?) and LSCM (La0.75Sr0.25Cr0.5Mn0.5O3-?)) were synthesised using microwave-assisted reverse-strike co-precipitation method and tested for soot oxidation activity. The calcined perovskite materials were characterized using FT-IR, XRD, SEM and BSE, BET and BJH and XPS analysis. The mean activation energy for soot oxidation was calculated from Ozawa plots at various heating rates (5, 10, 15 and 20 K/min) at different levels of soot conversions (T10 to T90) for BSCF, LSCM and LSCF perovskite materials and was around 133 11.5, 138 9.9 and 152 7.2 kJ/mol, respectively. Irrespective of the heating rates, BSCF material showed the lowest T50 temperature than compared to other samples, and it is correlated to the presence of Fe3O4 as a secondary phase. 2019, Springer Nature Switzerland AG.en_US
dc.titleStudies on the Solid Oxide Cell Perovskite Electrode Materials for Soot Oxidation Activityen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
File Description SizeFormat 
10 Studies on the Solid Oxide.pdf2.22 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.