Please use this identifier to cite or link to this item: http://idr.nitk.ac.in/jspui/handle/123456789/14757
Title: Effect of surface treatment on wetting behavior of copper
Authors: Kalgudi S.
Pavithra G.P.
Prabhu K.N.
Koppad P.G.
Venkate Gowda C.
Satyanarayan
Issue Date: 2019
Citation: Materials Today: Proceedings , Vol. 35 , , p. 295 - 297
Abstract: Super-hydrophobic surfaces are very useful in cleaning activities. Surfaces with water contact angles above 150° are regarded as superhydrophobic surfaces. In the present study an attempt has been made to achieve superhydrophobicity on copper substrate by electrochemical etching and electro-deposition of Co-Ni alloy and Co-Ni-Graphene composite. A contact angle of about 105° was obtained on Cu surface with electro-deposited Co-Ni alloy and on electro-deposited Co-Ni-G alloy contact angle was found to be 106°. The contact angle was significantly higher at about 142° with electro etched surface. Corrosion test was carried out with electrochemically etched Cu. Electrochemical etching time was varied from 30 to 240 min. The electro-etched Cu substrate etched for 60 min. showed better corrosion resistance with a corrosion rate of 0.197 mm/year. The surface topography of both etched and electrodeposited samples was studied by atomic force microscopy (AFM) and the results were correlated with the wettability data. © 2019 Elsevier Ltd.
URI: https://doi.org/10.1016/j.matpr.2020.01.379
http://idr.nitk.ac.in/jspui/handle/123456789/14757
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.