Please use this identifier to cite or link to this item: http://idr.nitk.ac.in/jspui/handle/123456789/15296
Title: Damage Analysis of Tool-Based Micromachining Setup Using Electrical Continuity-Based Contact Detection System
Authors: Veeresha R.K.
Muralidhara
Rao R.
Sushith K.
Shilpa M.K.
Issue Date: 2021
Citation: Journal of Failure Analysis and Prevention , Vol. 21 , 2 , p. 588 - 594
Abstract: Initial registration of tool with respect to workpiece is a critical requirement in tool-based micromachining setup. As the tool is in the order of few hundred micrometre diameter and rotating at very high speed, hence, the chance of tool breakage or workpiece surface damage during tool workpiece registration is more during micromachining. Initial tool registration of tool with respect to workpiece circuit was developed and incorporated with developed tool-based micromachining setup. The performance of the developed electrical continuity-based contact detection circuit was done by feeding the workpiece with different offset dimensions. From the experiments, it’s observed that there is more damage in workpiece when tool workpiece offset distance is more in both milling and drilling tools. © 2021, ASM International.
URI: https://doi.org/10.1007/s11668-020-01108-0
http://idr.nitk.ac.in/jspui/handle/123456789/15296
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.