Influence of High Mn-Cu-Mo on Microstructure and Fatigue characteristics of Austempered Ductile Iron

Abstract

The impacts of high Mn content on microstructure and fatigue characteristics of ADI at 300, 350 and 400 �C for 120 min have been examined. Optical microscopy images reveals bainite morphology only at 300�C. Higher Mn contents hinders bainite transformation in the locales of Mn and Mo segregation, where in stage II reaction initiates near the graphite nodules before stage I reaction ends away from the nodules which creates more unreacted austenite volume after cooling forming martensite around the periphery creating austenite-martensite zone at 350 �C and tremendously articulated at 400�C. Feathery ferrite laths, stable retained austenite and uniform density hardness in the matrix, promotes higher toughness and fatigue properties (250 MPa @ 106 cycles) at 300 �C. Presence of stage II carbides in the eutectic cell and austenite-martensite zone in the intercellular regions, due to their embrittlement in the matrix, makes easy crack path for initiation and propagation deteriorating properties at 350�C and above. SEM images of fatigue fractured surface revealed that at 300�C, showed a regular crack interconnecting graphite nodule, fatigue striation and quazi-cleavage fracture mode, and at 350 & 400�C reveals the carbide, austenite-martensite and porosity/defect final fracture region. � Published under licence by IOP Publishing Ltd.